Operating Frequency Range: 55 Hz – 19.5 kHz

Linear Peak SPL: 130 dB (Pink Noise)

Coverage: X40 Rotatable horn: 110° x 50°

Coverage: X42 Rotatable horn: 70° x 50°

Low Frequency: 2 X 8-inch cone drivers; 4 Ω nominal impedance

High Frequency: 1 X 3-inch diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance

Total Output Power: 1950 Watts Peak (3-channel, Class-D)

Enclosure: Premium multi-ply birch with slightly textured black finish

Rigging: 11 integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional accessories for various rigging options

Dimensions: 12.51"W x 22.31"H x 14" D

Weight: 52 lbs

Multi format playback: MP3, AAC, WAV and AIFF audio files on CD, DVD-ROM, SD Card and USB memory devices

Pro DJ link connects up to four CDJ-2000's that access one player's audio source

Instantly jump to specific song parts with Needle Search

Power Consumption: 28 W

Dimensions: 12.6"W x 15.94"D x 4.19"H

Weight: 10.14 lbs

Includes P9T transmitter and P9RA bodypack receiver

G6 (470-506 MHz) and G7 (506-542 MHz) frequency bands

Audio input connector type: Combination XLR and 6.35mm (1/4") TRS

Scan and Sync technology saves time during setup

CueMode lets the monitor engineer listen in on up to 20 mixes

Handy L/R outputs on the back panel can be used to daisy-chain units

Four combo (Handheld + Bodypack) channels

Four receivers in a rugged 1RU metal chassis with internal power supply

Individual gain controls, LED meters, and XLR outputs for each channel

RF cascade ports allow distribution of RF signal to another unit

Dante™ digital networked audio over Ethernet

Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control

Interference detection and alerts provided on both the receiver and WWB6

Compatible with the AXT600 Axient® Spectrum Manager

Yamaha® device ID allows simplified channel patching on CL consoles

Audio and RF LED meters with peak indicator

Switchable mic/line output level

Remoteable ½ wave antennas

G50 Frequency band

Input mixing channels: 72 mono + 8 stereo

Mix buses: 24

Matrix buses: 8 (Input to Matrix supported)

Stereo bus: 1

Mono: 1

Cue: 1

Local analog inputs: 8

Local analog outputs: 8

MY slots: 3

Dante I/O: Primary/Secondary

Local digital out: 1 AES/EBU

GPI: 5 in / 5 out (CL V1.11 or later)

Word clock I/O: Yes

MIDI I/O: In/Out

External redundant PSU: Optional PW800W

Ethernet: Yes

vMix is a Software Video Mixer and Switcher that utilises the latest advances in computer hardware to provide live HD video mixing, a task previously only possible on expensive dedicated hardware mixers. vMix also functions as live streaming software that allows you to publish your live productions directly to the Internet!

The live video production software solution runs on the windows 10 platform. Featuring LIVE mixing, switching, recording and LIVE streaming of NDI, full HD and 4K video sources including cameras, video files, DVDs, images, Powerpoint and much much more.

‍

‍

6 x RCA RDR3500 2-Way Radio

1 x RCA 6-Bank Charger

* Optional Ear Pieces Available ($5 - $10 each)

Developed for clean kick drum and bass guitar performance

Absolutely free of distortion even at high sound pressure levels

Very low diaphragm resonance

Narrow-band raising high-frequency response at 4 kHz

Freq. range: 20 Hz to 17 kHz

Impedance: 210 ohms

Dimensions: 5.9" x 2.8" x 4.5"

Weight: 2.2 lbs.

Control Panel for ATEM Switchers

Support up to 4 M/E ATEM Switcher

Programmable Color-Backlit Buttons

Built-In 5 inch LCD Screen

Control up to 20 Inputs

Multi-Language Support

Customizable Text

‍

‍

6K CMOS Sensor, Dual Native ISO

2/3" B4 Lens Mount & Active EF Mount

6K Blackmagic RAW Recording

Records to ProRes, H.265/264

12G-SDI Input & Output, Genlock/Timecode

13 x Stops of Dynamic Range

2 x UHS-II SD, 2 x CFast 2.0 Slots

Built-In 2/4/6-Stop ND Filters

XLR Inputs, 3.5mm Audio Output

ProRes Recording up to 1080p120

(*INCLUDES: Camera Body, Lens, Tripod, & Cable)

A single channel wired beltpack with a 4-pin male headset connector and 3-pin female/male loop through intercom line connectors

The beltpack has a 2.5mm AUX headset connector and an RS-232 data connector for programming

Frequency response: 200 Hz – 12 kHz contoured for intelligibility

Intercom line: (2) 3-pin XLR–M–F

Headset: 4-pin XLR–M

Dimensions: 4.58"H x 3.73"W x 1.34"D

Weight: 7.3 oz.

Hardware for the EAW KF650z loudspeaker

Joins multiple cabinets together at variable angles for array purposes

Support for up to 24 x VTX A12 enclosures

Single, front-to-back or side-by-side pick point options

0.5-degree pick point resolution

Built-in storage position for Extension Bar

Includes 1 x VTX A12 AF EB Extension Bar

Support for 3rd party laser inclinometers

Compatible shackle size: 5/8”

Dimensions: 10.15 in x 41.51 in x 39.89 in

Weight: 90lbs

New JBL 2288 transducer offers increased sensitivity, lower distortion and improved linearity

JBL SlipStream™ double-flared exponential ports for reduced noise and air turbulence

Built-in, easy to use, spring-loaded rigging system

Support for omnidirectional and cardioid array configurations

Front and rear NL4 connectors streamline cable management

Channel-selection switch minimizes wiring requirements

Mechanically compatible with the VTX A8 and all A8 suspension accessories

Full integration with JBL system prediction and control software

Dimensions: 21.72in x 29.97in x 29.0in

Weight: 150 lbs.

Frequency Range: (-10 dB) 55 Hz - 19.5 kHz

Coverage Pattern: (-6 dB) Horizontal: 60 / Vertical: 60

System Input Power Rating Passive: 1250 W Continuous

System Input Power Rating Active: LF: 1250 W Continuous / HF: 100 W Continuous

Maximum Peak Output: 136dB (Preset: VTX M20 FR)

System Impedance: 4 ohms

Dimensions: (H x W x D) 13.6 in x 22.6 in x 20.3 in

Net Weight: 51 lbs

Unique digital design: 4 inputs and 8 outputs, 1RU

12 delay lines / 16 all-pass filters / 16 hi & lo pass

4 comps / 8 look-ahead limiters / 80 bands of PEQ

System design and online control via Stardraw shell

Grouping facility allows unique system control

All facilities available all the time

Totally configurable, any combination possible

V3.0 software brings SMAART compatibility, (4 more PEQ's per input), plus parameter-specific lockout

Totally flexible routing allows DN9848 to run almost any type, configuration or make of system

It also allows amp racks to be truly multi-functional because they can be reconfigured to any application quickly and with no repatching

3 new sound Color Effects and 2 new Beat Effects

Manipulate parameters of each beat effect with X-Pad control

Built-in 24bit/96kHz high performance sound card

Pro DJ Link to connect up to 4 CDJ-2000s/900s or rekordbox™

Top panel USB connector for DVS software

Traktor Scratch Certified

Dimensions: 13.0"W x 16.1"D x 4.2"H

Weight: 15.7 lbs

Lightweight portable powered speaker with legendary QSC amplifier power and reliability

2000 watt continuous class D power module

Attractive and professional appearance

Rugged ABS enclosures

Intrinsic Correction™ tuning and loudspeaker management

Refined, professional appearance looks great in any application

Deployment in either main PA or floor monitor position

Factory Presets and savable/recallable Scenes for commonly-used application

Dual pole cup mounts (standard and 7.5 degree down-tilt)

Dimensions: 20.4 × 12.6 × 11.8 in

Weight: 32 lbs.

Multiple microphone cartridges available, including the legendary SM58

Transparent, 24-bit digital audio. 20 Hz – 20 kHz frequency range. 120 dB dynamic range

No transmitter gain adjustment needed– Up to 72 MHz overall tuning bandwidth – 22 compatible channels per 8 MHz TV channel

Up to 168 compatible channels per frequency band

Automatic channel scan quickly and easily finds a new frequency

IR Sync

Wireless Workbench® control software compatible

Switchable RF power (1,10mW)

Rugged metal construction

Backlit LCD with easy to navigate menu and controls

2 x AA batteries provide up to 9 hours of runtime

Rental Price Includes your choice of Handheld or Body Pack Transmitter (ADD $10 to have both)

Sound isolating sleeves

Delivers detailed sound with enhanced bass

2 x QSC K8.2 Powered Speakers

2 x Ultimate Support TS100B Speaker Stand

1 x Mackie ProFX12 (8) Channel Mixer

1 x iPod/Computer Input Cable

1 x Shure SM58 Wired Microphone

1 x Microphone Stand

1 x XLR Microphone Cable (25’ – 100’)

2 x XLR Speaker Cables (25’ – 100’)

32 mixable channels + 8 Stereo effect returns

16 Aux sends, 8 Matrix (or Aux), Stereo & Mono busses

Built-in recallable HA, identical to CL and R-series

Direct file compatibility with CL. No need to use Console File Converter Software.

16 Mix + 8 Matrix + Stereo + Mono outputs (Matrix can be utilized as additional Mix sends for a total of 24 Mix Outputs)

16 DCAs, 16 Mute Groups with Dimmer function

Large Touchscreen with excellent viewing angle and daylight visibility, same as CL

Touch-and-turn operation along with Selected Channel controls

Onboard Dante network with Primary/Secondary ports for redundancy or daisy chain

2 MY-Card Slots for additional I/O expansion or DSP processing such as Lake or Waves SoundGrid

8U Premium Rack featuring digital emulations of classic devices, Rupert Neve Designs

Portico 5033 5-Band EQ and 5043 Compressor, as well as a unique Dynamic EQ

8U Effect Rack with enhanced presets for Sound Reinforcement

16U GEQ Rack featuring the Flex15 option for 32 GEQs

8 or 16 channels of Dugan Automixing. These units can be used in exchange for GEQ units

Built-in 2-Track Recording to an external USB memory stick

Control of Nuendo Live software

Perfect for large groups, orchestras, stages and choirs

25 FT 3-pin cable, power module and wire hanger are included

Powered by an external 9V to 52V DC phantom power supply or from a 1.5V AA battery (not included)

Freq. Resp: 30Hz-20kHz

Weight: 5 lbs.

The champion of tom mics

Dynamic hypercardioid drum and instrument mic with warm, contoured response for added bottom and punch

Ideal for drums, sax, and brass

Great for congas and kick drums too

VLM noise-rejection capsule

Compact design for easy placement

Works with all ATEM Switcher

Control up to 4 Cameras

CCU Control Up to Four Cameras

For BMD URSA & Studio Cameras

4 x High-Quality Joysticks

Built-In LCD Screen

Lens and Iris Controls

‍

Covers Super 35 Large-Format Cameras

PL Mount, 4K Optical Performance

T2.95 to T3.95 Aperture, 25-250mm Zoom

Cooke /i Technology Support

LCD for User Functions and Settings

11-Blade Iris, 16-Bit Metadata Output

10x Zoom, 180° Focus Ring Rotation

Compatible with Servo Lens Controllers

Durable Design, Lightweight at 6.7 lb

‍

This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.This double-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dyanamic microphone that provide high quality audio

The headset has a flexible design and soft-ear pads to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 11.11 oz.

4 inputs (Analog, AES 3, VDrive, or CobraNet) routable to any of the 4 outputs

Rated Power Output: 2,100W @ 2 ohm, 2,200W @ 2.7 ohm, 2,400W @ 4 ohm, 1,900W @ 8 ohm, 4,200W @ 4 ohm Bridge, 4,800W @ 8 ohm Bridge

Dimensions (HxWxD): 3.3” x 19” x 16.95”

Weight: 29 lbs.

Kit contains all necessary hardware to properly suspend multiple EAW KF650z speaker enclosures

Innovative 3-way (bi-amp) design for best-in-class performance

JBL Differential Drive™ woofers and Slip Stream™ ports deliver optimal bass response down to 49 Hz

Common HF compression driver across A-Series products provides excellent sonic consistency

Mid-frequency Radiation Boundary Integrator® (RBI) design maximizes transducer density and improves horizontal directivity

Innovative auto-locking rigging mechanism for streamlined, rapid deployment

Built-in MF/HF passive network allows for reduced amplifier channels

Full-face, enclosed grille for refined aesthetics and weatherization (IP55)

Comprehensive mounting accessories expand configuration options

Integrates seamlessly with JBL system control and prediction software

Dimensions (H x W x D):8.92in x 29.97in x 14.77in

Net Weight: 65 lbs

Frequency Response (±3 dB): 40 Hz - 300 Hz

Recommended Amplification: (2 x) 1600 - 2000 W into 8 ohms (transducers powered individually) 3200 - 4000 W into 4 ohms (transducers powered in parallel)

2 x 2263H-1, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil, Dual Magnet, neodymium Differential Drive®, Direct Cooled

Nominal Impedance: 2 x 8 ohms

Input Connectors: Rear panel: Neutrik® Speakon® NL-4 and NL-8 (2x each), Front panel: Neutrik® Speakon® NL-4 (1x) for gradient cardioid configurations. All connectors in parallel, internal wiring; transducers circuited individually 1±, 2± (2 x 8 ohm) (NL4 and NL8)

Dimensions (H x W x D): 15.7" x 22.8" x 25.3"

Weight: 65 lbs.

2 x QSC K10.2 Powered Speakers

2 x Ultimate Support TS100B Speaker Stand

1 x Allen & Heath Zed-10 10Ch. Mixer

1 x iPod/Computer Input Cable

1 x Shure SM58 Wired Microphone

1 x Microphone Stand

1 x XLR Microphone Cable (25’ – 100’)

2 x XLR Speaker Cables (25’ – 100’)

Live performance and studio recording digital console with up to 40 simultaneous input channels

16 award-winning Midas PRO microphone preamplifiers

25 time-aligned and phase-coherent mix buses

AES50 networking allows up to 96 inputs and 96 outputs

192 kHz ADC and DAC converters for outstanding audio performance

40 bit floating point digital signal processing

8 DCA and 6 mute groups

8 digital signal processing effects engines

17 Midas PRO motorised 100 mm faders

Daylight viewable 5” full colour TFT display screen

32 x 32 channel USB 2.0 audio interface

DAW remote control emulations of Mackie Control* and HUI* protocols

Optional wireless remote control with Midas Apps for iPhone* and iPad*

Auto-ranging universal switch-mode power supply

Telephone handsets are used for FOH to communicate with the stage

Blazon flashers are triggered by the same voltage which lights the normal signal lamps in the intercom system and are useful when sound levels are too high to hear intercom call signals

A powerful club-ready DJ mixer for use with vinyl and Serato DJ DVS systems

Dual USB audio interfaces make battle setups and changeovers easy

Onboard EQs, filters, and effects provide excellent standalone functionality

Adjustable Magvel Pro crossfader lets you dial in the curve and resistance you like

16 RGB-backlit performance pads let you trigger hot cues, loops, rolls, and more

Customizable effects controls include high-visibility OLED displays

Lightweight portable powered speaker with legendary QSC amplifier power and reliability

2000 watt continuous class D power module

Attractive and professional appearance

Rugged ABS enclosures

Intrinsic Correction™ tuning and loudspeaker management

Refined, professional appearance looks great in any application

Deployment in either main PA or floor monitor position

Factory Presets and savable/recallable Scenes for commonly-used application

Dual pole cup mounts (standard and 7.5 degree down-tilt)

Dimensions: 17.7 × 11 × 10.6 in

Weight: 27 lbs.

Features a 944MHz to 952MHz, 50° beamwidth

Intended for use with Shure UHF-R receivers, PSM transmitters and antenna distribution systems

Dimensions 14"H x 14"W x 14"D

Weight 5 lbs.

Wideband UHF (470-952 MHz) four-way active antenna splitter and power distribution system

Allows the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers

A single UA844 system can support up to four ULX wireless receivers

1 RU

2 mic/line inputs with individual gain controls

16 transformer isolated outputs are individually switchable for mic or line level operation

20-segment LED level meter

Internal test tone generator

Built-in headphone monitor amp with volume control

High-pass filters

Phantom power

Powered by an external DC power supply or (4) 9v batteries

Dimensions: 20" x 9.5" x 8.5"

Weight: 12 lbs.

High resolution mixer and matrix (12x2) seamless switcher

High resolution scaler and down converter with integrated audio

Full high resolution digital processing

3 layers

Dynamic effects

12 inputs: 2 DVI, 8 universal analog, 2 x 3G/HD/SD-SDI, SDTV, EDTV, HDTV and computer formats up to 2K

Full digital In/Out processing

Outputs: 2 analog and digital outputs: main & preview, computer formats up to 2K, RGBHV and DVI

Video output: SD/HD-TV analog and 3G/HD/SD-SDI

This single-ear headset features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone that provide high quality audio

The headset has a flexible design and a soft-ear pad to offer superior comfort

Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting

Connector: 4-pin XLR

Weight: 8.6 oz.

3,500W (Stereo, 2-ohm/Ch.), 4,000W (Stereo, 4-ohm/Ch.), 2,100W (Stereo, 8-ohm/Ch.), 7,000W (Bridge Mono, 4-ohm), 8,000W (Bridge Mono, 8-ohm)

Digital input: AES/EBU, 24-bit, 32-96 kHz on-board sample rate converter

Network: Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware

DSP: 24-bit conversion with 32-bit, floating-point DSP processing

Dimensions: EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5"H, 16.2"D behind front mounting surface

Weight: 28 lbs.

Transducer: LF 2x 6.5 in. cone; HF 1x 1 in. exit, 1.75 in voice coil compression driver

Operating Range (-10 dB, Hz) 85Hz – 20kHz

Axial Sensitivity (1W @ 1m, dB SPL) Full Range: 90

Power Handling / Impedance (Watts @ Ohms) Full Range: 450W @ 8ohms

Calculated Maximum Output Peak (dB SPL) Full Range: 123db

Calculated Maximum Output Long Term (dB SPL) Full Range: 117db

Nominal Coverage (degrees): Horizontal: 100 Vertical: 100

Powering: Single amp LF/HF - Passive

Dimensions: H 20.93" x W 7.83" x D 9.72" 25lbs

System Type: Self-powered 12" two-way, bass-reflex

Max SPL Output: 126 dB

Frequency Range (-10dB): 48 Hz - 20 kHz

Frequency Response (±3dB): 57 Hz - 20 kHz

Coverage Pattern: 100° x 60°

Amplifier Design: Class D

Power Rating: 1,000 W

Inputs: Two (2) XLR/TRS Combo-jack inputs, mic/line selectable

THRU: Male XLR loop-thru for routing signal to additional EON600 series speakers

Dimensions (HxWxD): 26.14" x 14.96" x 12.44" (664 x 380 x 316mm)

Weight: 33 lbs. (14.96 kg)

Support for up to 24 x VTX A8 enclosures

Compatible with VTX A8 and VTX B18

Several pick-point options

0.5° pick-point resolution

Built-in storage position for extension bar

Includes 1 x VTX A8 AF EB extension bar

Support for 3rd-party laser inclinometers

Compatible shackle size: 5/8”

Dimensions: (H x W x D) 8.95 in x 28.90 in x 28.90 in

Weight: 45 lbs

4 x QSC K10.2 Powered Speakers

4 x Ultimate Support TS100B Speaker Stand

1 x Allen & Heath Zed-10 10Ch. Mixer

1 x iPod/Computer Input Cable

1 x Shure SM58 Wired Microphone

1 x Microphone Stand

1 x XLR Microphone Cable (25’ – 100’)

4 x XLR Speaker Cables (25’ – 100’)

Complete, Modular Teleprompting Solution

Supports Cameras from Mini DV to ENG

Pro Software for Small Studio Setups

HDMI I/O; DVI, VGA, Composite Inputs

Riser-Less Positioning

17 ft Reading Range

60/40 Beamsplitter Glass

Toolless Assembly

Folds Flat for Transport and Storage

‍

Combines up to eight PSM transmitters into a single antenna set

Improved RF networking

Reduced rack clutter

8 Input LED signals (green when active; off when inactive)

Quieter fan for significant reductions in ambient unit noise

Temperature-sensitive fan power for significant reductions in ambient unit heat

Active-channel amplifier power for additional reductions in ambient unit heat

1 Channel engaged = 1 set of power amplifiers active

Updated from PA821SWB, in which all power amplifiers were active in a block, regardless of how many of the 8 channels were active

Active UHF wireless directional antenna

Featuring a log periodic dipole array

The cardioid pattern provided by the UA870 offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.

To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user selectable 3 or 10 dB gain

The gain setting is indicated by two LEDs

Remote 12 Vdc power for the antenna amplifier is provided by a Shure U4 Receiver or a Shure UA840 Antenna Distribution System through the connecting coaxial cable

Can be mounted on a microphone stand, suspended from the ceiling, or mounted to a wall using the integrated swivel adapter bracket

Weather resistant for use outdoors

Slider controlled quartz locked continuous pitch adjustment of up to ±8%

Heavy duty aluminum diecast base absorbs unwanted vibrations from the dance floor and bass beat

Quartz direct drive accuracy

Very high torque motor for quick start-ups (only 0.07 seconds stop to speed)

Pop-up work light for low light gigs

Built-in anti-skate adjustment

Features standard high performance head amps and head-amp recall capability that allows head amp gain settings to be recalled along with the other console scene data

48 mono and 4 stereo inputs, 24 mix buses and 2 stereo outputs, and 8 matrix outputs (expandable)

Custom "DSP7" LSI for ultra-high-speed 96 kHz/32 bit processing

I/O capacity and functionality can be doubled or tripled by adding one or two rack mountable DSP5D Digital Mixing Systems

Easy "virtual sound check" with individually assignable channels does not require complex re-patching

Built-in VCM effects offer impeccable simulations of classic signal processing gear

8 high performance multi-effect processors and 12 graphic equalizers built in

Enhanced security features keep the system operating flawlessly in any application

8 mic/line inputs, 2 with Class A FET high impedance

60mm professional quality faders

Responsive 3-band, swept mid EQ with MusiQ

Configurable USB stereo audio in/out

1 pre-fade Aux send

1 FX send

2 stereo inputs

Separate 2-track record outputs

16 Internal Effects

XLR main stereo outputs with inserts

Comprehensive monitoring

48V microphone phantom power

DI level switching with Gain Boost

Neutrik XLRs and 1/4 inch jacks

Lightweight AC or battery power speakers with Bluetooth 15" Active speaker perfect for Mobile event where power might not be available Extremely high efficient design with low power consumption provides high output USB/SD playback with full transport controls. Bluetooth connectivity Built in Mixer with XLR Mic input, RCA Line inputs Master Volume, Channel Volumes and 5 Band Graphic EQ Trolley style pull up handle and wheel for easy transportation

Deinterlacing processing

Full audio digital compliant on DVI-D & HDMI Plugs

Audio fast routing mode

Quick frame mode

Direct swap function

Direct split function

EDID management on 6 inputs

Ability to read and display the output EDIDs

Custom output formats

Ability to modify the Program in real time without using the Preview

Capability to switch between any 14-input plugs (4 x DVI-D, 4 x HDMI, 4 x Universal Analog & 2 x 3G/HD/SD-SDI)

3D filter for SDTV composite sources

CVBS, YPbPr, and 3G-SDI video outputs

Computer formats up to 2K/2048 x 1152

Transitions - Fade (dissolve), Cut, Wipe, and Slide

Audio inputs can be embedded or de-embedded on all plugs

Audio breakaway mode

Audio top layer mode

Audio fast routing mode

Audio delay compensation

Balanced stereo audio on all outputs

2 x S/PDIF inputs and 2 x S/PDIF outputs

Internal test patterns

Chroma/Luma key and titling

8 memory presets per output (64 via RCS²)

8 full frames, 8 logo memories & 1 animated Logo

HDCP compliant

‍

The Macro-Tech® i Series continues the Crown® Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else

Network: Onboard HiQnet™, compatible with standard 100 Mb Ethernet hardware

6,000W burst (Dual, 2-ohm/Ch.), 3,750W (Dual, 2-ohm/Ch.), 4,500W (Dual, 4-ohm/Ch.), 2,100W (Dual, 8-ohm/Ch.), 7,500W (4-ohm Bridge), 9,000W (8-ohm Bridge)

XLR I/O

Speakon and binding post outputs

Three-position switch providing 1.4V, 32 dB, and 26 dB settings for both channels

Dimensions: 19"W x 3.5"H x 16.2"D

Weight: 28 lbs.

Jog shuttle wheel

Digital Out

A Playback mode selection button (SINGLE/CONT) and a PRESET button on front panel

Shock-proof function

The elapsed time position of the track is displayed as the current playback position

Instant start

Pitch Bend

Time button

Pitch (%) display

Variable pitch range of +/-8% or +/-4%

End of Message (EOM)

Pitch Bend

Auto disc holder close system

Generating Element: Dynamic

Frequency Response: 45Hz-18kHz

Polar Pattern: Cardioid

Virtually free of proximity effect

Impedance: 150 ohms balanced

Sensitivity, Open Circuit

Polarity: Pin 2 will be positive referenced to Pin 3 with positive pressure on diaphragm

Case Material: Steel

Accessories Furnished: 81715 stand clamp

Compact and lightweight design

Compatible with VTX A8 and VTX B18 enclosures

Single-point and side-by-side pick-point options

0.5∞ pick-point resolution

3-part collapsible design

Compatible shackle size: 1/2"

Dimensions: (H x W x D) 4.13 in x 31.28 in x 23.42 in

Weight: 16 lbs

100% Compatibility with your existing system

Analog/Digital operation

Waterproof/Dustproof (IP67 rating)

Includes: 1800mAh battery, charger, belt clip, and antenna

‍

The TL45 is ideal for use in theater settings

Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design

Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement

Best-in-class low self-noise and dynamic range for cleaner audio production

Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible syperhydrophobic, nanoscopic coating

Paintable 1.1 mm cable that is immune to memory effect and kinks

A single medical-grade spiraling conductor in the cable delivers increased flexibility while built-in reinforcing fibers offer additional cable strength for longevity

Sound signature: Natural

Sensitivity: Low

Color: Black

Connectors: TA4F

‍

Separated riser and platform eliminates camera shake from operator movement

Supports all standard tripods

Tripod Riser

- Height: 24"

- Spreader channel length: 24 3/4" (to center)

- Spreader channel width: 3"

- Weight capacity: 200 lbs.

Standing Platform

- Height: 23"

- Area: 23 1/4" x 23 1/4"

- Carpeted Area:15" x 15"

- Weight capacity: 300 lbs. Folds to a slim 3.5" x 28" x 28" Weight: 41 lbs

SDI to HDMI/DVI Converter with 2 Looping Inputs 3G, 1080p, HDMI 1.3

Input: 1 x SDI

Data Rate: 125 Mbps to 2.97 Gbps

Output: RJ45 with HDMI or DVI Adapter

HDMI 1.3 up to 1080p

Audio: Passes through 16 channels of Embedded Audio

Power: 5V DC

Weight: 1 lb.

Dimensions: 2.4"W x 4.4"D x 1.1"H

Mount: Magnetic

The Macro-Tech® i Series continues the Crown® Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else

Network: Onboard HiQnet™, compatible with standard 100 Mb Ethernet hardware

3,000W burst (Dual, 2-ohm/Ch.), 2,000W (Dual, 2-ohm/Ch.), 2,500W (Dual, 4-ohm/Ch.), 1,250W (Dual, 8-ohm/Ch.), 4,000W (4-ohm Bridge), 5,000W (8-ohm Bridge)

XLR I/O

Speakon and binding post outputs

Three-position switch providing 1.4V, 32 dB, and 26 dB settings for both channels

Dimensions: 19"W x 3.5"H x 16.2"D

Weight: 28 lbs.

RCA unbalanced analog I/O

S/PDIF coax and optical digital I/O

24 bit A/D and D/A converters

Sample rate conversion

Adjustable gain on digital I/O

Digital fade in/out from 1 sec to 24 sec

Built-in timer for preset play/record

RAM buffer

Programmable

Wireless remote included

Auto or manual track increment

Sync start

Frequency Response (±3 dB): 75Hz-18kHz

Horizontal Coverage Angle (-6 dB): 110 degrees nominal (averaged 250 Hz - 16 kHz)

Vertical Coverage Angle (-6 dB): Varies with array size and configuration

Recommended Amplification: 1400-1800 W at 12 ohms (single enclosure), 2800-3600 W at 6 ohms (two enclosures in parallel), 4200-5400 W at 4 ohms (three enclosures in parallel), 5600-7200 W at 3 ohms (four enclosures in parallel)

Low Frequency: Two 2166H-1, 165 mm (6.5 in) dia., 50 mm (2 in) Dual Coil, Dual Magnet Neodymium Differential Drive®, Direct Cooled

Mid Frequency: Four 2103G, 101 mm (2.5 in) with 25.4 mm (1 in) dia. voice coil and Neodymium magnet

High Frequency: Two 2414H, 25 mm (1 in) exit compression driver, Neodymium magnet, 38 mm (1.5 in) voice coil

Input Connectors: Neutrik® Speakon® NL-8 and NL-4 (2x each)

Input Selection (Slide Switch): Pins 3+/3- (NL8) and 1+/1- (NL4) or, Pins 4+/4- (NL8) and 2+/2- (NL4)

Dimensions(HxWxD): 7.8" x 22.8" x 10.3"

Weight: 34 lbs.

Lightweight earphone, rubber eartip, radio connector and clothing clip

Listen only earphone kit

Low-profile, flexible, transparent acoustic tube

Cables made with proprietary alloy of superior tensile strength

Rugged, texture-painted birch enclosures

Threaded pole socket

Speaker mounting pole included

Comfortable ergonomic handles

18” subwoofer

Maximum SPL 135 dB peak

1000 watt Class D continuous power

Tour-grade 16 gauge steel grilles

Dimensions: 20.3"W x 23.4"H x 29.9"D with casters

Weight: 94 lbs

An extremely versatile microphone that can be used to record drums, guitars, nearly any instrument, and even group vocals

Cardioid polar pattern

5-position roll-off switch

2 bass resonating tubes for exceptional low-frequency response

Frequency response: 30 - 17,000 Hz

Sensitivity: 2 mV/Pa

Nominal impedance at 1 kHz: 200 ohms

Comfortable, lightweight, and fully adjustable headset for use in theater, broadcast, and speech applications

Innovative clutch system allows for fast boom arm length and pitch adjustment

Twice the surface area of other subminiature microphones for pristine, natural response and robust low-frequency response due to the patent pending dual-diaphragm design

Improved off-axis consistency yields accurate reproduction regardless of vocal source position or movement

Best-in-class low self-noise and dynamic range for cleaner audio production

Interchangeable sweat- and moisture-resistant frequency caps prevents sweat-outs due to an invisible syperhydrophobic nanoscopic coating

Paintable 1.6 mm cable that is immune to memory effect and kinks

Dual redundant ground in cable serves as secondary shield for longevity

Sound signature: Natural

Sensitivity: Low

Color: Tan

Connector: MTQG/TA4F

32 great-sounding mic preamps achieve a transparent, natural sound

Connects directly to a Dante digital audio network for flexible system configuration at up to 96kHz

4 stereo AES outputs expand your connectivity

Dual redundant power supplies ensure peace of mind

Supports daisy-chain connections

Benefit from local control of gain and other parameters

Character display offers easy visual confirmation of your settings

1 HDMI Input / 1 HDMI Loop Output

2 3G-SDI Outputs w/ 4 Ch Embedded Audio

1 RJ45 Input for HDMI-Converted Signals

Analog Stereo Output

Supports HDMI 1.3a and 1.2

Converts1080p Input to 1080i Output

Built-In Color Bar Generator

Scans for Active Signal between 2 Inputs

HDCP Compliant / Requires Handshaking

Adjustable rubber ear loop

Works on right or left ear

Compatible connector for use with Motorola CP200 Radios

Array frame for suspension of VT4883, VT4886, or mixed VT4883/VT4886 arrays

Can also be used for ground stacking

Connects one or two standard vinyl or CD turntables to your computer using a single USB cable and audio connections to your DJ mixer

Creative DJing features: cueing, looping, keylock, the SP-6 Sample Player and DJ FX

Intuitive file management with smart crates, easy file and iTunes playlist migration

Multiple display modes for optimal library browsing

Advanced visual feedback for quick mixing

MIDI mappable controls

The cardioid E906 instrument microphone was especially designed for guitar amps and is also excellent for percussion and horns

Lively, full sound

Very fast attack

Flat shape is ideal for miking amp faces

Three position switchable sound character: bright, moderate, dark

Rugged metal body

A professional electret condenser microphone offering uncompromising sound quality and high reliability for television broadcasting, corporate lectures, A/V teleconferencing, houses of worship and sound reinforcement

CommShield® Technology guards against interference from cellular RF devices and digital bodypack transmitters

Matte black, sleek design for inconspicuous placement

Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise

Cardioid pickup pattern

Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility

‍

16 great-sounding mic preamps achieve a transparent, natural sound

Connects directly to a Dante digital audio network for flexible system configuration at up to 96kHz

Dual redundant power supplies ensure peace of mind

Supports daisy-chain connections

Benefit from local control of gain and other parameters

Character display offers easy visual confirmation of your settings

SD/HD/3G-SDI Input

HDMI and SDI Loop Outputs

Supports SD and HD Signals

Automatic Input Signal Detection

Software Control

A 16-channel automatic mixing controller that plugs into an open slot on Yamaha consoles

Allows a sound engineer to manage multiple live mics without continually riding individual faders

Detects active mics and makes fast, transparent cross-fades without the distracting sonic artifacts common to noise gates

24-bit resolution, 16-in/16-out automatic mixing (8-in/8-out at 96 kHz)

2x Optical connectors, 1x RJ-45 connector

Dimensions: 1.57”H x 4.72”W x 6.91”D

Weight: 5.6 oz.

Angled stand elevates laptop for convenience

A six-slot bay with (6) RCA single charging docks

Single outlet operation: All six units daisy chain together and combine into one power supply (included)

Contoured frequency response for clean, instrumental reproduction and rich vocal pickup

Professional-quality reproduction for drum, percussion, and instrument amplifier miking

Uniform cardioid pickup pattern isolates the main sound source while reducing background noise

Pneumatic shock-mount system cuts down handling noise

Extremely durable under the heaviest use

Frequency response: 40 to 15,000 Hz

Designed for general speech applications where a visually unobtrusive microphone is desirable

Ideal size for theater, television, broadcasting, video, film and sound reinforcement

Small, inconspicuous mounting hardware

HDMI Input

2 x SDI Outputs

Supports SD and HD Signals

Automatic Input Signal Detection

Software Control

The world's most popular dynamic vocal mic

Frequency response tailored for vocals, with brightened midrange and bass rolloff

Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise

Pneumatic shock-mount system cuts down handling noise

Effective, built-in spherical wind and pop filter

Supplied with break-resistant stand adapter which rotates 180 degrees

Legendary Shure quality, ruggedness, and reliability

Cardioid (unidirectional) dynamic

Frequency response: 50 to 15,000 Hz

A rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup

Fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances

Lightweight wireframe and elastic headband adjust for a secure, comfortable fit

Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones

Supplied foam windscreen and clothing clip

Over-the-ear stereo headphones with 1/4" TRS plug

8-Channel AES/EBU I/O Card 24bit resolution, 8-in/8-out AES/EBU interface (4-in/4-out at 96kHz) 1x D-sub 25 pin connector

Stylus Tip = Polished, natural diamond, spherical 18 µ (0.0007 in) radius

Stylus Grip Color = White; Stereo Output

Frequency Response = 20 to 20,000 Hz

Recommended tracking force (in grams) Max = 1.5 g, Min = 3 g

Support both 3G level A and B on the input and output.

Horizontal and/or Vertical image flipping via the built in scaler

Robust Aluminum Case with easy to use LCD and button control system.

4 x (3G/HD/SD)-SDI outputs, that allow it to be used as a 1 to 4 distribution amplifier. Output pair 1 can either be a copy of the SDI input (default) or the same as pair 2

Audio pairs in the SDI and HDMI outputs can be rearranged as required

20 Hz to 20 kHz frequency response

Flat response curve for accurate reproduction of sound sources

Low noise and high output clipping level

Low distortion over a wide range of load impedances

Cardioid polar pattern, uniform with frequency and symmetric about axis, providing maximum rejection and minimum coloration of off-axis sounds

Low RF susceptibility

Selectable low-frequency response: flat, 6 or 18 dB/octave rolloff

0 dB/10 dB lockable attenuator switch

Phantom powering (DIN 45 596 voltages of 12 to 48 Vdc)

Field-usable over wide range of temperature and humidity conditions

8 analog ins + 8 analog outs in one slot offering 8 channels of analog input plus 8 channels of analog output in a single-slot card

An excellent I/O expansion choice for Yamaha digital mixing consoles

Side-address, cardioid condenser mic for highly critical studio recording and live sound

Extended frequency response for open, natural sound

Exceptionally low self noise

Increased dynamic range

Transformerless pre-amp eliminates crossover distortion

15 dB attenuation switch for extremely high SPL

Gold-layered, low-mass Mylar diaphragm

Requires phantom power

Includes swivel mount and protective pouch

Available in black or champagne finish

Outstanding microphone for instruments ranging from percussion to wind, strings to brass, and piano to guitar

Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL)

Highly consistent cardioid polar pattern

3-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)

3-position switchable low-frequency filter reduces background noise and counteracts proximity effect

High performance mini-condenser microphone design

Excels at professional sound reinforcement or recording

Ultra-uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise

A98D microphone drum mount (supplied), allows for a secure rim-mounted microphone

Frequency response shaped specifically for kick drums and other instruments

Wide dynamic range for use in high SPL environments

Low-profile design requires no external mounting hardware

Detachable cable for easy storage

Legendary Shure quality, ruggedness, and reliability

Smooth, tailored frequency response provides detail, accuracy, and warmth for vocals

Extremely accurate supercardioid pattern at all frequencies provides the highest gain-before-feedback

Three-stage pop filter minimizes breath pop and noise

Break-resistant stand adapter

Frequency response: 50 to 18,000 Hz

Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect

Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound

Neodymium magnet for high signal–to–noise output

Hardened steel mesh grille that resists wear and abuse

Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration

Minimally effected by varying load impedance

Legendary Shure quality and reliability

A high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording

Excellent for acoustic and electric instruments as well as vocals

Frequency response: 50 - 16,000 Hz

Weight: 0.6 lbs.

The Shure Beta 56A dynamic microphone has a frequency response specifically tailored for drums and instruments

Uniform supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound

Built-in stand adapter with dynamic locking system and XLR connector

Weight: 1.6 lbs.